info@panadisplay.com

128x64 Graphic COG LCD Display Module For Smart Watch

General Specification NM12864-550 is graphic 128x64 lcd module serial spi interface,st7565r controller,3V voltage,FSTN lcd,white led backlight,wide operating temperature. Specification: 1. Display Mode: DFSTN Transmissive/Negative 2 .Viewing Angle: 6 O’Clock 3. Drive Method: 1/64 Duty 1/9 Bias,...

Description

General Specification

NM12864-550 is graphic 128x64 LCD module serial SPI interface, ST7565R controller, 3V voltage, FSTN LCD, white LED backlight, wide operating temperature.


Specification:

1. Display Mode: DFSTN Transmissive/Negative

2.Viewing Angle: 6 O’Clock

3. Drive Method: 1/64 Duty  1/9 Bias,  Vop=9.0V,  Vdd=3.3V

4. Top: -20℃~+70℃,  Tst: -30℃~+80℃

5. Connector: COG+FPC

6. Drive IC: ST7567

7.  Backlight: 2pcs white die LED,  30mA

8. Unassigned tolerances +/-0.20mm

 

Display Image

1.jpg

NM12864-550 128X64 graphics dot matrix COG LCD module


NM12864-550 128x64 LCD Module Serial Drive IC ST7565 White Backlight

3.jpg


128x64 Graphic COG LCD Display Module for Smart Watch



Application





PANASYS Factory



Packaging & Shipping

Packaging: Cartons, Cupboard, EPE, Blister Tray. About how many products in one package, it is up to the size of products, according to customer request.

Shipping: Express way as DHL, Fedex, EMS, UPS, air shipping,sea shipping. Any shipping method you prefer.

装箱运输图.jpg

 

 

FAQ

1.     I want the LCD module display 8 digits and the outline size is 65*30*2.8mm…

Answer: No problem. First, please send us your drawing paper or samples, we will introduce suitable one if it is standard products. Or we can modify based on one of it.

 

2.     This LCD module is just what we want, but it is a bigger size. Do you have any smaller size? And the display content need to be changed a little.

Answer: For the segment type LCD module, if you need to modify the outline size or display content, we will start the drawing paper for your checking.

 

3.     The backlight of this LCD module is yellow-green, but I want blue light.

Answer: No problem. We can change it for you.

 

4.     I want to customize a new LCD module. Can you do that?

Answer: Yes, we can. Please send us your drawing paper. If you don’t have, please tell us the information of the display and your demand. We will evaluate the cost and give you the price soon.

 

5.     What is the leading time for tooling?

Answer: 15 to 30 days after drawing paper confirmation and tooling charge payment. We can tell you the exact time when you confirm the drawing paper.

 

6.     Can you send us samples for checking?

Answer: Yes. Samples order is available.

 

7.     What is the leading time?

Answer: If we have stock for the standard displays, the leading time is one day after payment. If it is mass production for special ones, the leading time is about 15~30 days. If we finish earlier, we will send email to you in advance.


Send Inquiry