The NMLCD-12864R-002072B is a 128X64 DOTS MATRIX LCD module which is fabricated by low power COMS technology. It has an FSTN panel composed of 128 segments and 64 commons. The LCM can be easily accessed by microcontroller via I2C interface.
TRANSMISSIVE and NEGATIVE type
FSTN Mode LCD
128X64 DOTS MATRIX
I2C data input from MPU
WHITE If≤15mA f=2.8 V
2. MECHANICAL SPECIFICATION
26.70X （19.26+12.00） X1.90MAX
Viewing Area ( W*H)
23.744 X 12.864
Dot Pitch (W*H)
0.17 X 0.17
Dot Size (W*H)
0.154 X 0.154
Active Area (W*H)
21.744 X 10.864
Number of Dots
128 X 64
Back Light Color
3. PIN DESCRIPTIONS
Serial data input
Serial clock input
Hardware reset input pin
4. MAXIMUM RATINGS
monochrome lcd display module 128x64 graphic lcd display 0.96 inch display
0.96 inch Graphic display 128x64 Thin Touch Screen Display module
mono LCD display 128*64 0.96 inch display
Packaging & Shipping
Packaging: Cartons, Cupboard, EPE, Blister Tray. About how many products in one package, it is up to the size of products, according to customer request.
Shipping: Express way as DHL, Fedex, EMS, UPS, air shipping, sea shipping. Any shipping method you prefer.
1. I want the LCD module display 8 digits and the outline size is 65*30*2.8mm…
Answer: No problem. First, please send us your drawing paper or samples, we will introduce suitable one if it is standard products. Or we can modify based on one of it.
2. This LCD module is just what we want, but it is a bigger size. Do you have any smaller size? And the display content need to be changed a little.
Answer: For the segment type LCD module, if you need to modify the outline size or display content, we will start the drawing paper for your checking.
3. The backlight of this LCD module is yellow-green, but I want blue light.
Answer: No problem. We can change it for you.
4. I want to customize a new LCD module. Can you do that?
Answer: Yes, we can. Please send us your drawing paper. If you don’t have, please tell us the information of the display and your demand. We will evaluate the cost and give you the price soon.
5. What is the leading time for tooling?
Answer: 15 to 30 days after drawing paper confirmation and tooling charge payment. We can tell you the exact time when you confirm the drawing paper.
6. Can you send us samples for checking?
Answer: Yes. Samples order is available.
7. What is the leading time?
Answer: If we have stock for the standard displays, the leading time is one day after payment. If it is mass production for special ones, the leading time is about 15~30 days. If we finish earlier, we will send email to you in advance.