AMOLED And Wiggle Stereoscopy

AMOLED And Wiggle Stereoscopy

Apr 21, 2017

For a mature product line for decades of development, some inherent familiar display techniques are absolutely not a few. Whether it is a new listing or a classic, every a names will be in the hearts of the consumer to draw a profound imprint. It is not easy to find a breakthrough. Thus, for the current display market, increasing the stimulation of new technology, or the continued upgrading and upgrading of existing technologies, help users to use the display products that cover more technology in a simpler way. This will enable the monitor market to continue to develop.

AMOLED and wiggle stereoscopy is currently expected to change the display industry's two potential stocks. AMOLED is an active electromechanical excitation light diode display panel, relatively faster response, and can be applied to large-size screens, but relatively PMOLED relatively power consumption. and PMOLED (PassiveMatrix/OrganicLightEmittingDiode, passive electromechanical excitation light diode display panels), relatively slow response speed, not suitable for displaying dynamic images, but to more power, with the OLED lighting market gradually began to develop, the future PMOLED may gradually fade out display equipment, turn tapping the lighting market.

AMOLED refers to the phenomena of organic semiconductor materials and luminescent materials that are caused by electric field driven by carrier injection and recombination. The principle of AMOLED luminescence is to use Ito transparent electrode and metal electrode respectively as the anode and cathode of the device, driven by a certain voltage, electrons and holes are injected from the cathode and anode to the electron and hole transport layer respectively, electrons and holes are migrated to the luminous layer through the electron and hole transport layer, and in the glow layer meets the exciton and causes the luminous molecule to excite, the latter emits visible light through radiation relaxation. The radiant light can be observed from the Ito side, and the metal electrode film also acts as a reflective layer.

AMOLED compared with the traditional LCD panel, in response time, volume thick degree, power consumption, visual angle, quality color uniformity, resolution has a considerable advantage, but at present, AMOLED product cost and size is at a disadvantage. Although AMOLED has many innate advantages, not every well-known panel manufacturer will develop and produce AMOLED. Only a handful of high-end panel mills have increased their inputs, but in the long run, AMOLED production costs are inevitable. AMOLED uses organic materials, and glass with TFT arrays. But he has no backlight, no need for color film, which is that OLED cost has a lot of compressed space.

The present wiggle stereoscopy technology, although eliminates the user wearing glasses annoyance, therefore does not cause the picture brightness reduces the question, also not because glasses affect the user's daily use of experience, but users in the wiggle stereoscopy screen viewing, need to be in a specific position and angle to see the perfect 3d picture, if the angle or position has deviation, then 3d effect will be greatly discounted.

Furthermore, the current wiggle stereoscopy and polarized 3d, there will be a resolution of the problem of halving, so if users need to see full HD specifications 3d picture, the original resolution to reach the standard of close to 4K. In addition, the current wiggle stereoscopy cost is higher, so the related product prices will be high. In addition, 3d display technology has a common disadvantage, is that the user long time to watch, can cause serious visual fatigue, even if not wearing glasses of the naked eye 3d, can also trigger the problem of fatigue.

The current market, wigglestereoscopy panel of the main producers many, of which the main South Korea's LGDisplay and Taiwan's odd Mei electronics, friends Tatsu photoelectric-based. For the wiggle stereoscopy panel production, due to the limitations of the solution part, one of the biggest production barriers is to ensure that the liquid crystal molecule point to the point corresponding to the 3d patch, need very meticulous technology and technology. It is precisely because of the high process of manufacturing, finished product quality is not guaranteed, the corresponding cost is also increased sharply, so it is very difficult in the production area, so it is very limited to see the wiggle stereoscopy 3d panel.

AMOLED and wiggle stereoscopy these technologies support, in the future LCD market will shine, to provide users with the latest experience and continuous efforts to improve. Expect these technologies to be truly listed on the day and look forward to their close integration with the user's life. The future LCD market is their world, but also only such a novel technology, so that the industry can develop a longer and farther.