10.1 Inch 1024×600 Lvds TFT LCD Display

1. GENERAL DESCRIPTION

1.1 DESCRIPTION

NMLCD-1011024600-LVDS is a color active matrix thin film transistor (TFT) TN liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. It is composed of a TFT LCD panel, Driver IC, FPC and Backlight, This TFT LCD has a 10.1 inch diagonally measured active display area with WSVGA resolution (1,024 vertical by 600 horizontal pixel array).

1.2 FEATURES

No.	Item	Specification	Unit
1	Panel Size	10.1”	inch
2	Number of Pixels	1024×RGB (3) ×600	pixels
3	Active Area	222.72(H)x125.28(V)	mm
4	Pixel Pitch	0.2175(H)×0.2088(V)	mm
5	Outline Dimension	235(W)×143(H)×3.5(D)	mm
6	Number of Colors	16.7M	-
7	Display Mode	Normally White	-
8	Viewing Direction	6 o’clock	-
9	Display Format	RGB vertical stripe	-
10	Luminance(cd/m^2)	450(TYP.)	nit
11	Contrast Ratio	450(TYP.)
12	Surface Treatment	Anti-Glare	-
13	Interface	LVDS	-
14	Backlight	White LED	-
15	Operation Temperature	-10~65	℃
16	Storage Temperature	-20~70	℃
17	Weight	TBD	g

2. PIN DESCRIPTION

No.	Symbol	I/O	Function	Remark
1	VCOM	P	Common voltage
2	VDD	P	Digital power
3	VDD	P	Digital power
4	NC	-	Not connect
5	RESET	I	Global reset pin. Active low to enter reset state. Suggest to connecting with an RC reset circuit for stability. Normally pull high. (R=100K_，C=1μF)
6	STBYB	I	Standby mode, normally pull high STBYB=”1”, normal operation STBYB=”0”,timing control, source driver will turn off, all output are high-Z
7	GND	P	Ground
8	RXIN0-	I	Negative LVDS differential data inputs
9	RXIN0+	I	Positive LVDS differential data inputs
10	GND	P	Ground
11	RXIN1-	I	Negative LVDS differential data inputs
12	RXIN1+	I	Positive LVDS differential data inputs
13	GND	P	Ground
14	RXIN2-	I	Negative LVDS differential data inputs
15	RXIN2+	I	Positive LVDS differential data inputs
16	GND	P	Ground
17	RXCLKIN-	I	Negative LVDS differential clock inputs
18	RXCLKIN+	I	Positive LVDS differential clock inputs
19	GND	P	Ground
20	RXIN3-	I	Negative LVDS differential data inputs
21	RXIN3+	I	Positive LVDS differential data inputs
22	GND	P	Ground
23	NC	-	Not connect
24	NC	-	Not connect
25	GND	P	Ground
26	NC	-	Not connect
27	DIMO	O	Backlight CABC controller signal output